Phipower Hydrogen Inhaler – 666 ml/min H₂
Professional H₂ and O₂ generator with a total output of 999 ml per minute — 666 ml molecular hydrogen and 333 ml oxygen, at a specified purity of ≥ 99.99%. Intelligent TDS monitoring, an adjustable timer and comprehensive safety sensors make it suitable for daily home sessions as well as wellness practices, recovery studios and spas.
Fill. Select. Breathe.
The machine separates distilled water into hydrogen and oxygen through electrolysis. Fill the 1.2-litre reservoir, select a session duration on the timer and start — the system delivers a stable, continuous gas flow while its sensors monitor temperature, water level and water quality throughout the session. Molecular hydrogen (H₂) is the smallest naturally occurring gas molecule and is studied internationally for its potential role in oxidative balance, exercise recovery and general wellbeing. Many users pair a session with reading, meditation, desk work or post-training rest.
A consumer wellness device — not intended to replace medical treatment. Research into molecular hydrogen is ongoing and individual experiences may vary.
Powerful output. Intelligent protection. Simple operation.
High hydrogen output
666 ml of molecular hydrogen per minute — a continuous flow suited to longer sessions and frequent use, well beyond what compact portable devices deliver.
999 ml total gas flow
Electrolysis splits water into two parts hydrogen and one part oxygen: 666 ml H₂ plus 333 ml O₂ per minute, each with its own labelled outlet.
≥ 99.99% gas purity
Specified hydrogen and oxygen purity of at least 99.99% when used correctly and filled exclusively with suitable distilled water.
Intelligent TDS monitoring
A built-in sensor checks the water in the reservoir and warns you when it should be replaced — preventing contamination, mineral build-up and strain on the electrolysis cell.
Comprehensive safety
Overheating protection, low-water detection, tilt and angle detection, warning notifications and automatic shutdown — designed for responsible daily operation.
Simple controls, two modes
The clear display shows session time, water level, water quality and status. Day mode shows everything; night mode dims lighting and sound for quiet evening sessions.
Electrolysis at professional capacity, in numbers.
666 ml hydrogen + 333 ml oxygen per minute, continuously.
For both H₂ and O₂ when used with suitable distilled water.
Large reservoir with level window, TDS sensor and built-in resin filter.
110–220 V, 50–60 Hz mains operation; approx. 10 kg on smooth-rolling castors.
Specified values apply under correct use with distilled water (TDS ≈ 0) and regular maintenance as described in the user manual.
A session in six steps.
Place the machine upright on a firm, level surface in a well-ventilated room and remove the rubber plugs from each gas outlet.
Fill the reservoir exclusively with pure distilled water (TDS ≈ 0).
Connect the nasal cannula to the correct gas outlet and check that all connections are secure.
Select the desired session duration with the timer and start gas production.
Position the cannula comfortably beneath the nostrils and breathe calmly and normally.
New to hydrogen inhalation? Start with a short session and build up gradually as described in the manual.
Specifications
Care & maintenance: distilled water contains virtually no minerals, protecting the electrolysis cell, supporting gas purity and extending service life — tap, mineral, spring or filtered water is not suitable. Check the water level before every session, keep ventilation openings clear and inspect tubes and connections regularly. Replace the water when the TDS sensor advises it, after long periods without use, or when gas production drops. Replace the built-in resin filter approximately every 6–12 months depending on frequency of use, water quality and total operating time. Clean cannulas per the instructions and never share them between users. Safety essentials: hydrogen is flammable — use only in a well-ventilated room, away from flames, sparks, cigarettes and hot surfaces. Never use damaged tubing, block the gas outlets or cover the machine. Never use oxygen equipment close to the hydrogen generator; never modify the machine. Each person uses their own nasal cannula — never share. Stop at dizziness, breathlessness or discomfort; keep out of reach of children. Consult a doctor first if you are pregnant, take medication or have a heart or lung condition.
Frequently asked questions
How much hydrogen does the machine produce?
Up to 666 ml of molecular hydrogen per minute, plus 333 ml of oxygen per minute — a total gas output of 999 ml per minute.
Is this an oxyhydrogen generator?
The machine generates hydrogen and oxygen through electrolysis in a ratio of roughly two parts hydrogen to one part oxygen, each via its own labelled outlet. Follow the user manual when connecting and using the individual outlets.
Is hydrogen safe to inhale?
Hydrogen inhalation is being studied and used in various wellness environments. Responsible use requires a correctly functioning machine, adequate ventilation, suitable accessories and strict compliance with the user manual. Never use hydrogen near flames, sparks, cigarettes or oxygen-enriched equipment.
How long does a session last?
There is no universally established duration for wellness use. Begin with a short session and increase gradually according to the manual. Session length and frequency are personal choices, not medical advice.
Which water should I use?
Only pure distilled water with a TDS value of approximately zero. Tap, mineral, spring and filtered water contain minerals that can contaminate or damage the electrolysis cell — even water from a household filter is not automatically suitable.
How often should I replace the water?
The TDS sensor indicates when quality is no longer optimal. Also replace the water after long periods without use, when it appears contaminated, or when gas production decreases.
What happens at low water or overheating?
The machine detects a low water level and warns or interrupts operation. Overheating protection switches the machine off automatically — let it cool fully and check the ventilation openings before restarting.
Can several people use it at once?
Yes — with suitable Y- or X-connectors the gas flow is divided between connected users. For hygiene, each person must use their own nasal cannula and tubing set.
Is this a medical device?
No. It is supplied as a wellness device and is not intended to diagnose, prevent, monitor, treat, alleviate or cure any disease or medical condition.
Understand molecular hydrogen
Drinking vs. inhaling — how the research compares the two delivery methods.
You may also like
Make molecular hydrogen part of your daily wellness routine.
For €1,499 you receive an advanced H₂ and O₂ generator with 999 ml/min total output, digital display and timer, TDS monitoring, intelligent safety sensors, full accessory set with nasal cannula and bubble stick — plus a one-year warranty on manufacturing defects.
The Phipower Hydrogen Inhaler is an electronic wellness device. It is not intended to diagnose, prevent, monitor, treat, alleviate or cure any disease or medical condition, and does not replace a doctor, medication, oxygen therapy or any other medical treatment. Scientific research into molecular hydrogen and hydrogen inhalation is still developing; results from specific studies cannot be translated into guaranteed outcomes for individual users. No guaranteed claims are made regarding energy, immunity, metabolism, skin condition, recovery or the treatment of disease. Consult a doctor or qualified healthcare professional before use if you are pregnant, take medication, have a heart or lung condition or are receiving any other medical treatment.